Why bring in new cars?
Even modern cars still need to be driven in gently. This has the following reasons:
- Cylinder and piston rings do not yet fit perfectly
- Brakes do not develop their full braking power
- Brand new tires do not grip perfectly
- Springs and shock absorbers are still too tight
Drive in new cars: this is how it works
Engine, brakes, shock absorbers and tires: All of these new components must first be carefully accustomed to the loads. You can find out here what you should pay particular attention to.
Run in the engine – what should you watch out for?
Instead of driving your new car at full speed straight away, you should take it slow. Ride for the first 1,000 to 2,000 kilometers with two thirds of the available speed. The optimal speed range for a gasoline engine is initially around 4,500, for a diesel it is around 3,500 revolutions per minute (rpm). Are also recommended slight speed fluctuations instead of constant speed. Because the engine has to get used to the different load conditions. A hilly and winding country road is therefore ideal terrain to drive your car in gently.
In matters You should aim for a speed below 160 km / h if possible stay. After the first 1,000 kilometers, you can increase the speed and speed a little if the engine of your new car is run in sufficiently.
How do I break in new brakes correctly?
At the beginning it is necessary to step a little harder on the brake pedal. That’s because a new braking system is theirs full braking power only after 200 kilometers unfolds. The brake discs and brake pads also need time to grind in.
If the brake discs are loaded too early with full braking, this can result in damage. Ultimately, defective discs can quickly damage your entire braking system. So take the brakes gently.
Shock absorbers must also be run in
The interaction between springs and shock absorbers is often not yet optimal. Tightly set at the factory, they may not initially offer the expected comfort. The important thing now is that Do not overuse the cushioning. Therefore, avoid loading your car with luggage that is too heavy. You should also avoid driving on uneven roads, especially potholes.
What you should consider with the tires
Driving in a new car is not limited to the mechanical components such as the engine, transmission and shock absorber. New tires also have to be run in first. These develop theirs depending on the manufacturer full grip only after several hundred kilometers Taxi time. This is because tire manufacturers “bake” car tires in a mold.
So that the car tires fall out of shape more easily, there is an oily silicone-based coating on the surface, which disappears after around 200 to 300 kilometers. During this time, drive more cautiously in curves to counteract an excessive risk of slipping. A careful driving style and controlled braking are particularly important on wet roads.